To ensure your automotive inspection tools operate without major issues, proper maintenance can improve work efficiency:
Ensure the automotive inspection tools are kept in a dry environment: Storage temperature should be between -10°C and 60°C; humidity must be below 60%; particulate matter content should not exceed 2%.
Basic maintenance of automotive inspection tools: Keep the exterior of the tool's simulation blocks clean, paying particular attention to keeping pins, detection pins, base plates, etc., clean; place any movable parts that need to be disassembled in their designated positions.
Maintenance can be performed every six months or once a year.
Check for wear on the pin holes; replace any faulty ones immediately.
Check for looseness in the slide rails; add lubricant if necessary.
Check for wear and rust on the positioning reference points; replace or grind any worn or rusted reference points promptly.
Regularly check the scribed markings and coating for wear and peeling.
